Cart 0 Product Products (empty)
No products
To be determined Shipping
$0.00 Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping To be determined
Total
New Reduced price! 
View larger
View larger 
ISO 10304-4:1997
M00005097
New product
ISO 10304-4:1997 Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 4: Determination of chlorate, chloride and chlorite in water with low contamination
standard by International Organization for Standardization, 12/01/1997
In stock
More info
Full Description
This part of ISO 10304 specifies a method for the determination of the dissolved anions chlorate, chloride, and chlorite in water with low contamination (e.g. drinking water, raw water or swimming pool water).
An appropriate pretreatment of the sample (e.g. dilution) and the use of a conductivity detector (CD), UV detector (UV) or amperometric detector (AD) make the working ranges given in table 1 feasible.
| Table 1 - Working ranges of the analytical method | ||
|---|---|---|
| Anion | Working range mg/l* | Detection |
| Chlorate | 0,03 to 10 | CD |
| Chloride | 0,1 to 50 | CD |
| Chlorite** | 0,05 to 1 | CD |
| 0,1 to 1 | UV; = 207 nm to 220 nm | |
| 0,01 to 1 | AD; 0,4 to 1,0 V | |
| * The working range is restricted by the ion-exchange capacity of the columns. Dilute the sample in to the working range, if necessary. | ||
| ** The minimum working range for chlorite of 0,05 mg/l was obtained using calibration checks, but the round robin trials (annex A, table A.4) showed that it is difficult to obtain this with sufficient accuracy. Thus great care shall be taken when working in the lower range of this method. | ||