Cart 0 Product Products (empty)
No products
To be determined Shipping
$0.00 Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping To be determined
Total
New Sale! 
View larger
View larger PIP VESLP001
New product
PIP VESLP001 2012 Edition, June 1, 2012 Low-Pressure, Welded Vessel Specification
More info
Description / Abstract: This Practice describes the basic requirements for the design, materials, fabrication, examination, inspection, and testing of aboveground, welded, cylindrical shell, single-wall vessels having an internal and external Maximum Allowable Working Pressure (MAWP) not exceeding 15 psig at the top of the vessel in the normal operating position. An additional specification may be required to define options covered herein and other specific requirements considering service (startup, normal operation, upset, shutdown), location, maintenance, etc. The documents listed in Section 2.1 should be used for a complete purchase specification.
This Practice is not intended for flat-bottom tanks or API-type field-erected storage tanks. Unless approved by Purchaser, this Practice is not to be used for low-pressure vessels that will contain "Lethal Substances" as defined in Code Paragraph UW-2 Footnote 1.
Purpose
This Practice provides requirements for the construction of low-pressure, welded vessels that generally must meet the philosophy and requirements of Section VIII, Division 1 of the ASME Boiler and Pressure Vessel Code (Code), but do not require Code inspection or stamping. Vessels may be shop or field fabricated.
This Practice is not intended for flat-bottom tanks or API-type field-erected storage tanks. Unless approved by Purchaser, this Practice is not to be used for low-pressure vessels that will contain "Lethal Substances" as defined in Code Paragraph UW-2 Footnote 1.
Purpose
This Practice provides requirements for the construction of low-pressure, welded vessels that generally must meet the philosophy and requirements of Section VIII, Division 1 of the ASME Boiler and Pressure Vessel Code (Code), but do not require Code inspection or stamping. Vessels may be shop or field fabricated.