Cart 0 Product Products (empty)
No products
To be determined Shipping
$0.00 Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping To be determined
Total
New Sale! 
View larger
View larger GMW14363
New product
GMW14363 2nd Edition, February 1, 2013 Determination of Indentation Hardness of Foam Components at Constant Force
More info
Description / Abstract: Note: Nothing in this standard supercedes applicable laws and regulations.
Note: In the event of conflict between the English and domestic language, the English language shall take precedence.
Purpose. This test procedure shall be used to determine the indentation hardness of small elastic foam components where the size of the component precludes the use of other standard methods.
The results obtained by measurements on components of differing shapes, or at different locations on the same component, or by the use of different sized indentors are not necessarily comparable.
Test results obtained by measurements on components of similar shape, but of different structures (cellular, etc.), are comparable provided measuring conditions are identical.
The indentation hardness is defined as the depth of penetration (in millimeters) of a standard shaped indentor when pressed under constant force into the foam component for 30 s, 60 s, or other time as may be specified.
Applicability. Polyurethane (PUR) back foaming Instrument panel, headrest, armrest, soft integral foam.
Note: In the event of conflict between the English and domestic language, the English language shall take precedence.
Purpose. This test procedure shall be used to determine the indentation hardness of small elastic foam components where the size of the component precludes the use of other standard methods.
The results obtained by measurements on components of differing shapes, or at different locations on the same component, or by the use of different sized indentors are not necessarily comparable.
Test results obtained by measurements on components of similar shape, but of different structures (cellular, etc.), are comparable provided measuring conditions are identical.
The indentation hardness is defined as the depth of penetration (in millimeters) of a standard shaped indentor when pressed under constant force into the foam component for 30 s, 60 s, or other time as may be specified.
Applicability. Polyurethane (PUR) back foaming Instrument panel, headrest, armrest, soft integral foam.