Cart 0 Product Products (empty)
No products
To be determined Shipping
$0.00 Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping To be determined
Total
New Sale! 
View larger
View larger GMW16910
New product
GMW16910 2nd Edition, December 1, 2015 Applied Decorative Graphics on Powertrain Components
More info
Description / Abstract: This specification describes the requirements for engine component decorative graphics.
Material Description. Materials shall be classified by Types to identify material construction and properties. Type A shall be hot stamp foils, and Type B shall be ink pad printing.
Type A - Hot Stamp Foils. Foils generally consist of a thin carrier strip of acetate, cellophane, or polyester film (depending on application), a release coat, a color, or metallized coat, and a sizing coat (adhesive). When applied to parts, such products are sometimes called hot stamped coatings or finishes, or just "hot stamps".
Type B - Ink Pad Printing. Pad printing is generally accomplished by adding a graphic design to the substrate using an epoxy ink.
Typical Applications. Where decorative graphics are desired on the powertrain.
Material Description. Materials shall be classified by Types to identify material construction and properties. Type A shall be hot stamp foils, and Type B shall be ink pad printing.
Type A - Hot Stamp Foils. Foils generally consist of a thin carrier strip of acetate, cellophane, or polyester film (depending on application), a release coat, a color, or metallized coat, and a sizing coat (adhesive). When applied to parts, such products are sometimes called hot stamped coatings or finishes, or just "hot stamps".
Type B - Ink Pad Printing. Pad printing is generally accomplished by adding a graphic design to the substrate using an epoxy ink.
Typical Applications. Where decorative graphics are desired on the powertrain.