Cart 0 Product Products (empty)
No products
To be determined Shipping
$0.00 Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping To be determined
Total
New Sale! 
View larger
View larger GMW17698
New product
GMW17698 1st Edition, November 1, 2016 Electrodeposition Primer for Purchased Parts
More info
Description / Abstract: This specification details the general materials performance, compatibility, and processing requirements for approval of electrodeposition (ELPO, E-Coat (electrocoat)) primers for purchased parts.
Material Description. The coating material described in this specification is an organic coating applied electrically over steel and aluminum. It is often referred to as: Electrophoretic coating, E-Coat, and electrocoat.
Symbols. Not applicable.
Applicability. This specification covers parts that are ELPO coated outside of GM, including those parts that may receive subsequent topcoats. Parts must be cleaned and receive a pretreatment using approved materials. Processing parameters should conform to those recommended by the chemical suppliers. De-ionized or reverse osmosis water rinses must be included and properly maintained in order to meet the processing performance requirements of this specification. These primers are intended to provide corrosion and chip resistance and may or may not be intended for subsequent coating for appearance purposes. These coatings must perform over bare Cold Rolled Steel (CRS), Galvanized steel, and Aluminum substrates (Al).
Remarks. Not applicable
Material Description. The coating material described in this specification is an organic coating applied electrically over steel and aluminum. It is often referred to as: Electrophoretic coating, E-Coat, and electrocoat.
Symbols. Not applicable.
Applicability. This specification covers parts that are ELPO coated outside of GM, including those parts that may receive subsequent topcoats. Parts must be cleaned and receive a pretreatment using approved materials. Processing parameters should conform to those recommended by the chemical suppliers. De-ionized or reverse osmosis water rinses must be included and properly maintained in order to meet the processing performance requirements of this specification. These primers are intended to provide corrosion and chip resistance and may or may not be intended for subsequent coating for appearance purposes. These coatings must perform over bare Cold Rolled Steel (CRS), Galvanized steel, and Aluminum substrates (Al).
Remarks. Not applicable