Cart 0 Product Products (empty)
No products
To be determined Shipping
$0.00 Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping To be determined
Total
New Sale! 
View larger
View larger GMW15261
New product
GMW15261 3rd Edition, April 1, 2017 Exhaust System Component and Joint Leakage
More info
Description / Abstract: Introduction
Note: Nothing in this standard supercedes applicable laws and regulations.
Note: In the event of conflict between the English and domestic language, the English language shall take precedence.
Purpose. The purpose of this procedure is to determine the static leakage, pull-apart load and the torque specification on each attachment of the exhaust system - joint interface.
Applicability. These tests apply to exhaust systems.
Note: Pull-apart load test does not apply to flange joints.
Remarks. This document contains four procedures: torque angle to ultimate, hand torque to seal and leakage, static leakage check, and pull-apart load. These tests can be conducted individually.
Note: Nothing in this standard supercedes applicable laws and regulations.
Note: In the event of conflict between the English and domestic language, the English language shall take precedence.
Purpose. The purpose of this procedure is to determine the static leakage, pull-apart load and the torque specification on each attachment of the exhaust system - joint interface.
Applicability. These tests apply to exhaust systems.
Note: Pull-apart load test does not apply to flange joints.
Remarks. This document contains four procedures: torque angle to ultimate, hand torque to seal and leakage, static leakage check, and pull-apart load. These tests can be conducted individually.