Cart 0 Product Products (empty)
No products
To be determined Shipping
$0.00 Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping To be determined
Total
New Sale! 
View larger
View larger More info
Description / Abstract: Material Description. This standard covers the requirements for elastomeric ball joint boots, for service free ball and socket joints used in steering and suspension assemblies. Materials covered by this specification are divided into three (3) Types.
Type A. Polychloroprene (CR) with maximum 5% by mass Nitrile Butadiene Rubber (NBR); for normal use on passenger vehicles and light commercial vehicles.
Type B. Polyurethane (PU) Elastomer; for use in arduous conditions, such as heavy commercial vehicles.
Type C. Drawing defined (e.g., using SAE J200 or ASTM D2000 line callout).
Symbols. Not applicable.
Applicability. Elastomeric ball joints boot, used in steering and suspension assemblies
Type A. Polychloroprene (CR) with maximum 5% by mass Nitrile Butadiene Rubber (NBR); for normal use on passenger vehicles and light commercial vehicles.
Type B. Polyurethane (PU) Elastomer; for use in arduous conditions, such as heavy commercial vehicles.
Type C. Drawing defined (e.g., using SAE J200 or ASTM D2000 line callout).
Symbols. Not applicable.
Applicability. Elastomeric ball joints boot, used in steering and suspension assemblies