Cart 0 Product Products (empty)
No products
To be determined Shipping
$0.00 Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping To be determined
Total
New Sale! 
View larger
View larger GMW16841
New product
GMW16841 2nd Edition, September 1, 2017 Polyether-ether-ketone (PEEK) – Carbon Fiber Reinforced, Polytetrafluoroethylene (PTFE) Lubricated
More info
Description / Abstract: Material Description.
This standard covers the properties of a 15% carbon fiber reinforced, 15% polytetrafluoroethylene (PTFE) lubricated polyether-ether-ketone (PEEK) material. The repeat unit of this aromatic, semi-crystalline PEEK polymer comprises oxy-1.4-phenylene-oxy-1.4-phenylene-carbonyl-1.4- phenylene as shown in Figure 1. This compound can be injection molded to various components.
Symbols.
The material abbreviations according to ISO 11469 are shown in Table 1.
Applicability.
This material can be used for transmission seal and thrust washer applications on steel mating surfaces with a minimum of Rockwell C 28. Materials with high strength, high temperature resistance, good transmission fluid resistance and good wear resistance are expected. It is user’s responsibility to validate its feasibility of running against soft mating surfaces, such as aluminum.
This standard covers the properties of a 15% carbon fiber reinforced, 15% polytetrafluoroethylene (PTFE) lubricated polyether-ether-ketone (PEEK) material. The repeat unit of this aromatic, semi-crystalline PEEK polymer comprises oxy-1.4-phenylene-oxy-1.4-phenylene-carbonyl-1.4- phenylene as shown in Figure 1. This compound can be injection molded to various components.
Symbols.
The material abbreviations according to ISO 11469 are shown in Table 1.
Applicability.
This material can be used for transmission seal and thrust washer applications on steel mating surfaces with a minimum of Rockwell C 28. Materials with high strength, high temperature resistance, good transmission fluid resistance and good wear resistance are expected. It is user’s responsibility to validate its feasibility of running against soft mating surfaces, such as aluminum.