Cart 0 Product Products (empty)
No products
To be determined Shipping
$0.00 Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping To be determined
Total
New Sale! 
View larger
View larger GMW16519
New product
GMW16519 2nd Edition, January 1, 2018 Procedure for the Manufacture of Carbon Fiber Sediment
More info
Description / Abstract: Introduction
Note: Nothing in this standard supercedes applicable laws and regulations.
Note: In the event of conflict between the English and domestic language, the English language shall take precedence.
Purpose.
Produce representative friction material debris for transmission controls testing.
Applicability.
The carbon fibers produced with this procedure are applicable to transmission and transmission component testing requiring typical carbon fiber debris. Two grades of carbon fiber are produced with this standard. Fine grade carbon fiber is typical of long term wear debris. Long grade carbon fiber is typical of debris generated during initial break-in of the Torque Converter Clutch (TCC).
Remarks.
The debris generated by carbon fiber torque converter clutch friction materials used in GM automatic transmissions is electrically conductive (nominally 1.1 X 10-3 Ω-cm). These fibers have the potential to affect the performance of exposed electrical devices as well as inhibit the motion of control valves.
Note: Nothing in this standard supercedes applicable laws and regulations.
Note: In the event of conflict between the English and domestic language, the English language shall take precedence.
Purpose.
Produce representative friction material debris for transmission controls testing.
Applicability.
The carbon fibers produced with this procedure are applicable to transmission and transmission component testing requiring typical carbon fiber debris. Two grades of carbon fiber are produced with this standard. Fine grade carbon fiber is typical of long term wear debris. Long grade carbon fiber is typical of debris generated during initial break-in of the Torque Converter Clutch (TCC).
Remarks.
The debris generated by carbon fiber torque converter clutch friction materials used in GM automatic transmissions is electrically conductive (nominally 1.1 X 10-3 Ω-cm). These fibers have the potential to affect the performance of exposed electrical devices as well as inhibit the motion of control valves.