No products
FORD WSS-M4D291-F1 2016 Edition, July 5, 2016 FLEXIBLE POLYURETHANE FOAM, WATER SEALING DIE CUT – WITH ADHESIVE BACKING ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D240-A2 2007 Edition, January 17, 2007 COATING, POWDERED, THERMOPLASTIC NYLON (TYPE 11 OR 12)***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D1068-A1 2019 Edition, August 22, 2019 POLYBUTYLENE TEREPHTHALATE (PBT) + POLYETHYLENE TEREPHTHALATE (PET), 55% GLASS FIBER REINFORCED MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D1067-A2 2000 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), HIGH MELT FLOW, LOW STIFFNESS, 17% MINERAL FILLED, FULLY PAINTED ONLY, MOLDING COMPOUND, EXTERIOR
FORD WSS-M4D1067-A1 2019 Edition, March 22, 2019 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), HIGH MELT FLOW, LOW STIFFNESS, 17% MINERAL FILLED, MOLD-IN-COLOR ONLY, MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D1063-A2 2000 POLYPHENYLENE SULFIDE (PPS) MOLDING COMPOUND, IMPACT MODIFIED, LOWER MODULUS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D1063-A1 2017 Edition, September 15, 2017 POLYPHENYLENE SULFIDE (PPS) MOLDING COMPOUND, IMPACT MODIFIED, HIGHER MODULUS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D1061-A1 2016 Edition, May 19, 2016 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), 5% MINERAL THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), 5% MINERAL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D1057-A1 2015 Edition, October 15, 2015 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), 24% MINERAL FILLED, MOLD IN COLOR, HIGH IMPACT, UV STABILIZED, MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D1056-A1 2017 Edition, July 27, 2017 POLYCARBONATE COPOLYMER, MOLD IN COLOR, UV STABLE, A GLOSS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D1055-A1 2017 Edition, January 4, 2017 POLYPROPYLENE (PP), 35% SHORT GLASS FIBER REINFORCED, CHEMICALLY COUPLED, HEAT RESISTANT, MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D1054-A1 2012 Edition, November 21, 2012 POLYAMIDE (PA) 66, HEAT STABILIZED, 25% GLASS FIBER REINFORCED BLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***