No products
SAE AMS3751CMicrospheres, Hollow Glass (Stabilized: Jan 2012)standard by SAE International, 01/16/2012
SAE AMS3751BMicrospheres, Hollow Glass ( Reaffirmed: Apr 1994 Mar 2003 )standard by SAE International, 04/01/1990
SAE AMS3742Elastomer: Rubber, Silicone (MQ/VMQ/PVMQ) Flame Retardant, Low Smoke Density, Low Smoke Toxicity 50 – 60 Durometer Type A Hardness for Products in Pressurized Aircraft Compartment Interiorsstandard by SAE International, 03/29/2022
SAE AMS3741Elastomer: Fluorosilicone Rubber (FVMQ) Fuel and Oil Resistant 75 - 85 Durometer Type "A" Hardness For Products in Fuel Systems/Lubricating Oilsstandard by SAE International, 02/28/2019
SAE AMS3741Elastomer: Fluorosilicone Rubber (FVMQ) Fuel and Oil Resistant 75 - 85 Durometer Type ¿¿¿A¿¿¿ Hardness For Products in Fuel Systems/Lubricating Oilsstandard by SAE International, 02/28/2019
SAE AMS3737BPotting Compound, Epoxy, Unfilled 35 - 40 Cte, 160 Hdt Room Temperature Curestandard by SAE International, 06/01/1996
SAE AMS3736BPotting Compound, Epoxy, Filled 25 - 30 Cte, 175 Hdt Room Temperature Curestandard by SAE International, 06/01/1996
SAE AMS3735CPotting Compound, Epoxy, Filled 10 - 15 Cte, 225 Hdtstandard by SAE International, 06/01/1996
SAE AMS3734BPotting Compound, Epoxy, Unfilled General Purpose Room Temperature Curestandard by SAE International, 06/01/1996
SAE AMS3733CPotting Compound, Epoxy Two Part, Highly Filled, Heat Cure, High Compressive Strength (Stabilized: May 2015)standard by SAE International, 05/13/2015
SAE AMS3733BPotting Compound, Epoxy, Two Part, Highly Filled, Heat Cure, High Compressive Strength (Noncurrent: Jan 1993)standard by SAE International, 01/01/1993
SAE AMS3732BPotting Compound, Epoxy One Part, Filled, Heat Cure, Low CTE (Stabilized: May 2015)standard by SAE International, 05/13/2015